AllFreePapers.com - All Free Papers and Essays for All Students
Search

Network Analysis - Case Study

Autor:   •  December 15, 2011  •  Case Study  •  474 Words (2 Pages)  •  1,774 Views

Page 1 of 2

MANAGEMENT TASK 1B

1. A company vehicle is to undergo overhaul in a workshop. On arrival at the workshop, the vehicle is to be stripped down to enable all of the paint to be removed from the chassis so that it can be thoroughly inspected for damage. Any damage found is to be repaired and the chassis is to be painted prior to any reassembly taking place. Whilst removal of the paint and inspection of the chassis can be started as soon as the vehicle is stripped, it is not possible to complete the task until the engine and electrical harness have been removed from the chassis. Repair work is not to start until the inspection has been completed.

2. The engine, vehicle electrical harness, electrical equipment (battery, starter motor and alternator), and fuel injectors are to be overhauled in four independent areas of the workshop. The electrical harness, electrical equipment and injectors cannot be removed until the engine has been taken out of the chassis, and the engine should not be removed until the vehicle has been stripped.

3. The electrical harness must be installed in the chassis before the engine is refitted.

4. The engine has to be subjected to a full running test in an engine test house remote from the repair areas before it can be installed. To enable the running test to take place, the overhauled injectors, alternator and starter motor must be refitted.

5. Once all of the work has been completed the vehicle it is to be given a full road test.

6. The QA department needs to perform check inspections of the vehicle at key stages in the overhaul programme:

a. After the chassis has been repaired and prior to respraying.

b. After vehicle has been rebuilt and prior to the road test.

c. Prior to returning the

...

Download as:   txt (3.1 Kb)   pdf (68.6 Kb)   docx (11 Kb)  
Continue for 1 more page »